Models - Graco XM Installation-Parts

Models

Models
XM OEM sprayers are not approved for use in hazard-
ous locations.
Use the following matrix to define the construction of the sprayer, based on the six digits. For example, Part XMEA00
represents an XM Plural-Component OEM sprayer (XM); 5200 psi pump set with pump filters (E); wall power supply
that is not approved for hazardous areas (A).
NOTE:
To order replacement parts, see Parts section the XM Plural-Component Sprayer Repair-Parts manual 313289. The
digits in the matrix do not correspond to the Ref. Nos. in the Parts drawings and lists.
XM
First and Second
Digits
XM A
(OEM plural com-
B
ponent sprayer
E
without a frame)
F
G
H
System Pressure
Code
E 5200 psi (35, 350)
F 5200 psi (35, 350)
G 6300 psi (49, 490)
H 6300 psi (49, 490)
NOTE:
See Accessories and Kits, page 25, for a list of avail-
able accessories and kits.
6
E
Third Digit
System Choice
(See Table 1 for lower models)
Pump Set
(hose/gun) Pump Filters
no pumps
no pumps
5200 psi
5200 psi
6300 psi
6300 psi
Table 1: Lower Models and Corresponding Identification Codes
(MPa, bar)
Remote
Manifold



Pump A Lower
Filters (see manual 311762)

L250C4
L250C3

L180C4
L180C3
A
Fourth Digit
Control Box Choice
Control Box
A Wall Power Supply
D Alternator
B Lower
(see manual 311762)
L220C4
L220C3
L145C4
L145C3
00
Fifth and Sixth
Digits
Always 00