Installation; Location (All Models) - Graco 15V823 Instructions And Parts

Installation

Installation
For Electrostatic Guns:
• Read warnings, page 3.
• Follow the warnings in your electrostatic gun man-
ual.
You must connect safety interlock air to prevent atom-
izing air from turning on during flushing.
The kit includes a solenoid, air piloted shutoff valve, and
the tubing and fittings required for installation.
NOTE: ProMix 2KS systems can use two guns. Use kit
15V823 for gun 1 and kit 15V829 for gun 2. Kit 15V829
incorporates a shuttle valve to facilitate proper flushing
in a two-gun system.
4

Location (All Models)

Locate the atomizing air shutoff valve (2) in a convenient
location between the Fluid Panel and the spray area,
but far enough away from possible application
over-spray.
0.375 in.
(9.5 mm)
1/4-20 x 1/2 in.
(13 mm deep
1.375 in.
(35 mm)
F . 1: Shutoff Valve Mounting Diagram
IG
2
TI15213a
1.375 in.
(35 mm)
TI14546a
310745J