Table of Contents
Advertisement
Closing Seam Machine 1282-4 Working Instructions
C.5
WARNING - Electric shock!
Contact with current-carrying components may cause
a lethal electric shock
If the machine is put in motion accidentally, persons
in its direct vicinity may be caught by moving parts
which may cause injuries.
Prior to any service, cleaning or maintenance works,
disconnect the machine from the power supply
system!
•
Turn the machine off using the main switch.
•
Remove power plug from socket and protect it
against accidental reconnection.
•
If the power supply is not required for repair or set-
up work, the machine must be disconnected from
the power supply system.
C.5.1 Inspection
The machine must be inspected annually.
The inspection comprises particularly the following items:
•
safety devices of the machine,
•
operativeness of the program control,
•
correct function of inputs and outputs.
Maintenance
Beisler Automated Sewing Equipment
C.5.2 Cleaning
The machine must be cleaned after large production se-
ries, or at least once a day, whichever occurs first.
Cleaning the machine surfaces:
1. Disconnect machine from power supply system.
2. Remove fabric residues.
3. Using compressed air, blow off dust and thread resi-
dues at the sewing head, at the puller, at the working
plate and at the contour guide.
4. Wipe machine parts dry using a dry, clean cloth.
NOTE - Plastic surfaces!
Some parts of the machine surfaces are made of plastic
materials. Solvents may dissolve plastics and make them
unusable.
Do not clean the machine surfaces (particularly the ope-
rating panel) with cleaning agents that contain solvent.
- 9 -
Advertisement
Table of Contents
