Moving Machine To Zero Position; Stopping A Sewing Program; Turning The Machine Off - Beisler 1282-4 Working Instructions

Closing Seam Machine 1282-4 Working Instructions
B.3
B.3.10 Moving machine to zero position
Prior to starting production, after machine tests or after
corrections to sewing programs, the machine must be re-
turned to zero position for starting the machine cycle:
1. Press program stop switch.
2. Unlock program stop switch.
(See also Section B.3.11, Stopping a sewing program)
B.3.11 Stopping a sewing program
1. Press program stop switch.
When this switch is pressed, all machine movements
and the sewing process are stopped immediately. The
switch engages when pressed.
To restart the machine after a program stop, all functions
must be reset, and the machine must be returned to zero
position by unlocking the program stop switch.
2. Unlock program stop switch.
Slightly rotate switch in the clockwise direction. The
switch returns to its original position.
The control program performs a reset.
Operation
Beisler Automated Sewing Equipment
B.3.12 Turning the machine off
For extended work intermissions, the machine must be
turned off completely.
1. Turn power supply off by moving main switch to
position 0.
2. Disconnect machine from compressed air supply.
- 19 -