Table of Contents
Advertisement
Result display
34/59
Selecting a cursor
The cursors can be selected by using the touch-screen.
Moving the cursor
The cursor can be moved on the trace from one
measurement point to the next or by jumping from one
channel to the next (both forward and backward).
To move the cursor on the trace:
1. Select the cursor
2. Press the direction keys
cursor backward or forward. If the cursors distance
is locked, both cursors will be moved in parallel.
To jump from one channel to the next:
1. Select a channel in the table
2. Press the direction keys
channel backward or forward.
The zoom function
Both x- and y-axis can be zoomed.
When zooming the x-axis, the area to be zoomed is
defined by the selected cursor and its position:
• If only one cursor is selected, the cursor position
is kept while the areas left and right to the cursor
are zoomed.
• If both cursors are selected the center between
both cursors is kept.
and ➤ to move the
and ➤ to to jump one
Nano-OSA user manual
Advertisement
Table of Contents
