Table of Contents
Advertisement
2 Overview
PRODUCT DESCRIPTION
The 1 GHz ZS1000 is a small, high impedance active probe designed to
meet today's increasing demand for measurements on a variety of test
points.
With low input capacitance and high input resistance, circuit loading is
minimized.
The ZS1000 can be used with LeCroy's WaveSurfer, WaveRunner,
WaveMaster, and WavePro series platforms with firmware version 4.9.3
or later.
With the ProBus interface, the ZS1000 becomes an integral part of the
oscilloscope. The probe can be controlled from the oscilloscope's front
panel. The oscilloscope provides power to the probe, so there is no
need for a separate power supply or batteries.
KEY BENEFITS
• High frequency performance
• Low input capacitance
• Wide dynamic range
• ProBus interface
• Four interchangeable tips for probing a variety of test points (one
standard, three optional accessories)
ZS1000-OM-E Rev C
Overview
2–1
Advertisement
Table of Contents
