Table of Contents
Advertisement
Screen Examples In This Manual
The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the scanner
application you are using.
The screenshots in this manual were captured
from FUJITSU TWAIN32 scanner driver,
ScandAll 21 Image Capturing Utility Software,
fi-5000N Software, FUJITSU ISIS scanner driver
and QuickScan™ image capturing software.
■Safety Precautions
ARNI N G
Do not damage the AC cable.
A damaged AC cable may cause fire or
electric shock. Do not place heavy objects
on AC cables, or pull, bend, twist, heat,
damage or modify AC cables.
Do not use damaged AC cables or power
plugs, or install any cables or power plugs
to loose wall sockets.
Use only specified AC cables and
connector cables.
Use only specified AC cables and
connector cables. Failure to use the
correct cables might cause electric shock
and/or equipment failure.
Do not use the AC cable provided with this
product for other devices, since this might
cause equipment failure and other
troubles or an electric shock.
Use this device only at the indicated
power voltage. Do not connect to
multiple-power strips.
Use this device only at the indicated
power voltage and current. Improper
power voltage and current might cause
fire or electric shock. Do not connect to
multiple-power strips.
Do not touch the AC cable with wet
hands.
Do not touch the power plug with wet
hands. Doing so might cause electric
shock.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the
power plug or metal fittings with a soft, dry
cloth. Accumulated dust can cause fire or
electric shock.
Do not install the device in locations
that has oil smoke, steam, humidity,
and dust.
Do not install the device in locations
subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or
electric shock.
Turn the device OFF if it is damaged.
If the device is damaged for any reason,
turn the device off and unplug the power
cable. Contact the store where you
purchased the device.
Do not put liquids inside the device.
Do not insert or drop metal objects in/on to
the device. Do not splash or allow the
device to get wet.
If foreign objects (water, small metal
objects, liquids, etc.) get inside the device,
immediately turn off the device and discon-
nect the power plug from the power outlet.
Then, contact the store where you bought
the device or the Maintenance Service Cen-
ter. Pay particular attention to this warning
in households where there are small chil-
dren.
Do not touch the inside of the device
unless necessary.
Do not take apart or modify the device. The
inside of the device contains high-voltage
components. Touching these components
might cause electric shock or fire.
fi-5000N Getting Started
v
Advertisement
Table of Contents
