Scanner Driver - Fujitsu FI-5000N Getting Started

■ Installing the FUJITSU TWAIN32

Scanner Driver

Windows XP screenshots are used in
this section as examples. The
HINT
windows and operations may slightly
vary depending on your OS.
1. Turn on the power of the PC, and log on to
Windows.
When using Windows 2000 or
ATTENTION
Windows XP, log on as a user with
"Administrator" rights.
2. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from "Explorer" or
"My Computer".
3. Click [INSTALL PRODUCTS].
4. Click [TWAIN Driver] on the window below.
5. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
6. Follow the instructions on the window to install
the software.
7. When the [InstallShield Wizard Complete]
window appears, click [Finish].
Your PC will be restarted. Do not remove the Setup CD-
ROM until your PC has completely restarted.
fi-5000N Getting Started
7