Advertisement
Advertisement
You can control your air conditioner using either the AIRSTAGE Mobile mobile application or the AIRSTAGE Edge Controller.
To install the Fujitsu UTY-TFSXH3 WLAN Adapter, plug it into the connection slot of the indoor unit. After installation, perform appropriate function setting according to the installation environment, referring to the SETTING MANUAL and INSTALLATION MANUAL of the indoor unit.
The Fujitsu UTY-TFSXH3 WLAN Adapter connects to an indoor unit, which then communicates with a Wireless LAN router. This setup allows control via a Smart device (AIRSTAGE Mobile) or an AIRSTAGE Edge Controller connected to the network.
With the mobile app for the Fujitsu UTY-TFSXH3 WLAN Adapter, you can control various functions including Operation on/off, Operation mode setting, Set temperature setting, Fan speed setting, Airflow direction setting (Louver position adjustment and Swing), Timer setting (Weekly timer), ECONOMY operation setting, Human sensor for energy saving setting, Energy saving fan setting, Outdoor unit low noise operation setting, POWERFUL operation setting, Room temperature indicator, and Remote controller prohibition (Lockout).
To perform the initial setup with AIRSTAGE Mobile for the Fujitsu UTY-TFSXH3 WLAN Adapter:
For the Fujitsu UTY-TFSXH3 WLAN Adapter, the wireless router must support IEEE802.11b/g/n and operate on 2.4 GHz frequency bands. Supported network security standards include Open, WEP, WPA (PSK), WPA2 Personal (PSK), and WPS for same-LAN registration.
For optimal connection with the Fujitsu UTY-TFSXH3 WLAN Adapter, install the wireless router near the indoor unit. Be aware that certain types of wall materials may shut out wireless communications.
For applicable indoor units, refer to the product catalogue posted on the Support page of the web site.
During installation, disconnect the power supply or turn off the breaker before starting work. Do not turn on the power until all installation work is complete. Also, discharge static electricity on your body, do not touch the circuit board and circuit board parts directly with your hands, and do not touch the indoor unit heat exchanger.
The Fujitsu UTY-TFSXH3 WLAN Adapter supports controlling via mobile devices running iOS and Android.
No, the Fujitsu UTY-TFSXH3 WLAN Adapter does not have operation buttons and indicator lamps. Settings should be done using the remote controller, and the status should be checked on the indicator lamps of the indoor unit.
No, the combination use of AIRSTAGE Mobile and AIRSTAGE Edge Controller is prohibited with the Fujitsu UTY-TFSXH3 WLAN Adapter.
The adapter information label for the Fujitsu UTY-TFSXH3 WLAN Adapter is important because it contains the WLAN Adapter setting information. It is recommended not to discard this label.
The operating temperature range for the Fujitsu UTY-TFSXH3 WLAN Adapter is 0 to 46 °C (32 to 114.8 °F).
Need help?
Do you have a question about the UTY-TFSXH3 and is the answer not in the manual?
Questions and answers