Table of Contents
Advertisement
If the contents are correct, press the [ENT] key. The
following screen appears.
Initializing
network...
The network settings are completed.
If the fi-5000N is initialized, the settings
done in this section will return to their
HINT
default values. In order not to forget the
settings done in this section, take notes
of them.
MEMO
IP address: ...........................
Subnet mask: .......................
Default gateway .....................
DNS 1: ................... ..............
DNS 2: .................................
When "Use DHCP" is selected in step
5, it is not necessary to take notes for
IP address, Subnet mask and Default
gateway.
2.4 Installing the Driver
In order to scan documents from a PC using the scanner
connected to fi-5000N, it is necessary to install the scan-
ner driver and the scanning application software on to
the PC.
The following scanner drivers and applications are
provided.
• Scanner Driver:
FUJITSU TWAIN 32 Scanner Driver
FUJITSU ISIS Scanner Driver
• Scanning Application:
ScandAll 21 (for FUJITSU TWAIN 32)
QuickScan Pro™ (for FUJITSU ISIS)
Install the appropriate scanner driver for the application
you will use.
The operation examples in this manual were described
using the FUJITSU TWAIN 32 scanner driver and Scan-
dAll 21 scanning application.
6
The following describes how to install each driver.
•
Although the scanner is bundled
ATTENTION
with its own scanner driver, to
connect the scanner to this product,
you must use the scanner driver
bundled with this product.
•
To support more scanners and
improve the product, the scanner
driver is subject to change. If you
want to get the latest scanner driver,
please visit our website.
•
QuickScan Pro™ is not bundled
with this product. Use the software
bundled with the scanner.
Refer to the "Getting Started" pro-
vided with the scanner for installa-
tion details.
•
In order to use ScandAll 21, you
must install the ScandAll 21 bundled
with this product. It was modified to
comply with the fi-5000N.
•
When configuring the network, do
not allocate multiple IP addresses to
the personal computer used for
scanning.
•
If the OS is Windows XP, do not let
another user log on using the
[Switch User] function during scan-
ning.
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before installing the
software.
• Prepare the Setup CD-ROM
• Uninstall any older versions of FUJITSU
TWAIN 32 driver if already installed.
Uninstall [Scanner Utility for Microsoft
ATTENTION
Windows] from [Add/Remove
Programs] of the Control Panel.
Advertisement
Table of Contents
