Installing The Evaluation Mcu - Fujitsu PGA-401P Operation Manual

Chapter 4 Connections

4.3 Installing the Evaluation MCU

Install the evaluation MCU on the evaluation MCU mounting IC socket on the adapter board as illustrated in
Figure 4.3-1 to Figure 4.3-3. To uninstall the evaluation MCU, follow the instruction illustrated in Figure 4.3-4.
Installing the Evaluation MCU
Open the lever of the evaluation MCU mounting IC socket (SC1) to from the solid-line position to
the dotted-line position.
Mounting Position
Align pin No. 1 of the evaluation MCU with its pin hole in the evaluation MCU mounting IC socket
(SC1) and insert the evaluation MCU horizontally. (Check this from above.)
20
All manuals and user guides at all-guides.com
Evaluation MCU
Evaluation MCU mounting IC socket
Figure 4.3-1 Installing the Evaluation MCU
Evaluation MCU
pin No. 1
Figure 4.3-2 Mounting Position
M2(SC1)
Evaluation MCU mounting IC socket