Infrastructure Mode; How To Handle This Device - Fujitsu Stylistic LT 800P User Manual

S t y l i s t i c L T 8 0 0 P T a b l e t

Infrastructure Mode

2
If a number of computers are connected simultaneously in the AdHoc mode, the transfer
rate may be reduced, communications may become unstable, or the network connection
could fail. This is because all wireless LAN cards are using the same radio frequency in the
network.
To improve this situation, you can use a wireless LAN access point, which is sold
separately. The wireless LAN network is in the "Infrastructure mode" when it uses an
access point, and such a connection is called the "Infrastructure Network."
By using an access point, you can set and use a different communication channel for each
network group. Each channel is given a different radio frequency, and it eliminates the
collision of communications and provides a more stable communications environment.
Infrastructure mode is most suitable when you are configuring multiple wireless LAN
networks on the same floor.
To connect a wireless LAN network to a wired LAN, you need an access point.

How to Handle This Device

2
The optional Integrated Wireless LAN device is already installed in Stylistic LT800P tablet
computers that have been so configured. Under normal circumstances, it should not be
necessary for you to remove or re-install it. The LAN has been configured to support the
operating system with which your system shipped.
The On/Off switch located on the Wireless LAN cover turns the device on and off. You
should switch the device off when it is not in use in order to maximize battery life.
70