Fujitsu Stylistic LT 800P User Manual page 37

Pen calibration may be required due to the following situations:
• The pen is being used for the first time.
• The previous user of the Stylistic LT800P tablet writes with the opposite hand or
at a different pen angle.
• The system has been in use for some time and the pen has not been recalibrated.
• The original system image has been restored.
To Calibrate the Pen
1. Open the Control Panel from the Start|Settings menu, and double-tap the Pen
Configuration icon. Select the Calibration property sheet, then click on Pen
Calibration.
2. Position the Stylistic LT800P tablet as you normally would during use. Be sure
to hold the pen at the angle that you regularly use. Touch the screen only with
the pen tip; if you inadvertently touch the screen with your finger or hand
during the calibration process, faulty calibration may result.
3. Perform the calibration steps according to the instructions on the screen. The
calibration utility displays a cross-hair symbol in the middle and corners of the
screen, one corner at a time. Hold the pen as you normally would while using
the system and, as accurately as possible, tap the center of each crosshair as it is
displayed.
A dialog box is displayed after you tap the last of the four cross-hair symbols.
Tap the screen within 20 seconds if you wish to save your new calibration
settings. If you don't tap the screen within 20 seconds, the default calibration
settings will be used.
4. When the Verify New Pen Calibration Settings window appears, choose one of
the following steps.
• If you are satisfied that you tapped the cross-hairs accurately, tap Yes. The
taps that you performed in step 3 are then used to calibrate the screen.
• If you do not want to use the new calibration, tap No.
• If you want to enter a new calibration, tap Recalibrate. The calibration
instructions reappear.
If you have successfully performed the procedure above, the pen is now recalibrated,
and you can use the system as you normally would.
U s i n g Y o u r T a b l e t P C
2
35