Table of Contents
Advertisement
Power Management
Your Fujitsu STYLISTIC has many options and
features for conserving battery power. Some
of these features are automatic and need no
user intervention, such as those for the internal
modem. However, others depend on the
parameters you set to best suit your operating
conditions, such as those for the display
brightness. Internal power managements for
your Tablet PC mat be controlled from settings
made in your operating system, pre-bundled
power management application, or from
settings made in BIOS setup utility.
Besides the options available for conserving
battery power, there are also some things that
you can do to prevent your battery from running
down as quickly. For example you can create
as appropriate power saving profile, put your
Tablet PC into Suspend mode when it is not
performing as operation, and you can limit the
use of high power devices. As with all mobile,
battery power computers, there is a trade-off
between performance and power savings.
Power/Suspend/Resume Button
When your STYLISTIC is active, the Power/
Suspend/Resume button can be used to
manually out your Tablet PC into Suspend
mode. Push the Power/Suspend/Resume
button when your Tablet PC is active, but not
actively accessing anything , and immediately
release the button. You will hear two short
beeps* and your system will enter Suspend
mode.
If your STYLISTIC is suspended, pushing the
Power/Suspend/Resume button returns your
Tablet PC to active operation. You can tell
whether the system is Suspended by looking at
the Power indicator. If the indicator is visible and
not flashing, your Tablet PC is fully operational.
If the indicator is visible and fl ashing, your
notebook is in Suspend mode. If the indicator is
not visible, the power is off or your Tablet PC is
in Hibernation mode.(See Hibernation Feature)
* Only applicable for some models
Using Your STYLISTIC
Suspend Mode
Suspend or S tandby mode i n Wi ndow s
saves the contents of your STYLISTICs
system memory during periods of inactivity by
maintaining power to critical parts. This mode
will turn off the CPU, the display, the hard drive,
and all of the other internal components except
those necessary to maintain system memory
and allow for restarting. Your Tablet PC can be
put in Suspend mode by:
• Pressing the Power/Suspend/Resume
button when your system is turned on.
• Selecting Standby from the Windows Shut
Down menu.
• Timing out from lack of activity.
• Allowing the battery to reach the Dead
Battery warning condition.
Your STYLISTICs system memory typically
stores the file on which you are working you
are working, open application information, and
any other data required to support operation
from Suspend mode, your Tablet PC will return
to the point where it left off. You must see the
Power.Suspend/Resume button to resume
operation, and there must be as adequate
power source available, or your Tablet PC will
not resume.
15
Advertisement
Table of Contents
