Starting Bios Setup - Fujitsu Stylistic LT 800P User Manual

The BIOS Setup utility is a program that allows you to change your system's BIOS
settings. The BIOS Setup application is stored in the system's CMOS memory. The
BIOS Setup utility configures device control parameters (such as changing I/O
addresses and boot devices) and system data security parameters such as passwords.

Starting BIOS Setup

To start BIOS Setup,
1. Shut down your computer if it is running.
2. Start your system. When the following message appears,
<F2>, Double tap the pen+: BIOS Setup
double tap the pen on the display screen or press F2 on your external keyboard.
3. The system starts BIOS Setup and the BIOS Setup Main menu is displayed.
Note that the system can be configured to start without displaying the message
above. If this is the case, you must attach an external keyboard and hold down
the F2 key while you start your system until the BIOS Setup screen is displayed.
Once BIOS Setup is started, you can use it to change your system's BIOS settings. Use
the information at the bottom of the screen to navigate through the various screens.
U s i n g Y o u r T a b l e t P C
2
41