Fujitsu Stylistic LT 800P User Manual page 93

Problem
IP packet isn't
reaching its
destination
(continued)
Cannot connect to
the network
Possible Cause
There are several
possible causes, as
listed to the right.
Refer to the
specific section of
this manual or your
user's manual.
U s i n g t h e W i r e l e s s L A N
Possible Solution
Example: if the destination IP address is
10.0.1.3:
C:\>ping 10.0.1.3
A message similar to the following appears
if the connection is successful.
Pinging 10.0.1.3 with 32 bytes of data:
Reply from 10.0.1.3: bytes=32 time=1ms
TTL=32
Reply from 10.0.1.3: bytes=32 time<10ms
TTL=32
Reply from 10.0.1.3: bytes=32 time=4ms
TTL=32
Reply from 10.0.1.3: bytes=32 time<10ms
TTL=32
If the connection fails, [Request timed
out], [Destination host unreachable], or a
similar message appears. In this case, refer
to the "Other computers are not
displayed" portion of this chapter.
The following causes are possible. Check
each one of them.
The network name or encryption key
is not right.
The driver has not correctly started.
The destination computer is not
turned on.
You do not have the access privilege
to the destination computer.
The card has failed.
Hardware conflict.
91