Fujitsu Stylistic LT 800P User Manual page 23

Table 1-2. Peripheral Connectors/Interfaces
Connector/ Fig.
Peripheral Ref.
IrDA/FIR 1-4
port
Modem 1-4
Charging 1-6
Contacts
Mini-dock 1-6
†
port
LAN Port 1-6
(RJ-45)
Infrared 1-6
keyboard
port
† Remove the mini-dock interface cover to access this port.
Tablet Icon
An infrared transceiver built into the tablet
allows you to communicate with other
devices that are compliant with the IrDA
Standard Rev. 1.1. Effective range for infrared
communication is about 3 feet, and within 15
degrees off of center. A clear line-of-sight
path must exist between the IrDA port on the
tablet and the IrDA transceiver on the other
device.
Connect a telephone line to the optional
internal modem using a standard RJ-11
telephone plug.
Install the tablet in an approved docking
device. The contacts provide DC input.
Connect the Stylistic LT800P mini-dock. Refer
to the documentation accompanying the
docking device for more information.
The LAN (RJ-45) is used to connect the
internal Ethernet device to a LAN or
broadband devices such as a cable modem,
DSL, or satellite internet.
An infrared receiver built into the tablet allows
you to communicate with a wireless infrared
keyboard or wireless infrared mouse. The
infrared port on the keyboard or mouse works
optimally between 10 to 30 cm
(approximately 4 in. to 12 in.) from the
keyboard infrared port, located on the
bottom-left edge of the tablet. Ensure that a
clear line-of-sight path exists between the
infrared receiver on the tablet and the infrared
transmitter on the keyboard.
G e t t i n g S t a r t e d
Purpose
21