Download Print this page

Fujitsu Stylistic 5030 User Manual

Tablet pc
Hide thumbs

Advertisement

Quick Links

Copyright and Trademark Information
Fujitsu Computer Systems Corporation has made every
effort to ensure the accuracy and completeness of this
document. Because ongoing development efforts are
made to continually improve the capabilities of our prod-
ucts, however, the data contained herein represents
Fujitsu design objectives and is provided for comparative
purposes; actual results may vary based on a variety of
factors. This product data does not constitute a warranty.
Specifications are subject to change without knowledge.
Fujitsu and the Fujitsu logo are registered trademarks of
Fujitsu Limited; Stylistic is a registered trademark of
Fujitsu Computer Systems Corporation.
Microsoft and Windows are registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries.
PCMCIA and CardBus are registered trademarks of the
Personal Computer Memory Card International Associa-
tion.
Intel, Pentium, and SpeedStep are trademarks or regis-
tered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.
Atheros is a registered trademark of Atheros
Communications, Inc.
Responsible Party Name:
Declares that product:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and, (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note: For more detailed information about the FCC rules and their applicability to the Stylistic ST5000 Series
Tablet PC, refer to Chapter 5 of this document.

DECLARATION OF CONFORMITY

Fujitsu Computer Systems Corporation
Address:
1250 E. Arques Avenue, MS 122
Sunnyvale, CA 94085
Telephone:
408-746-6000
Model Series: Stylistic® ST5000 Tablet PC
Complies with Part 15 of the FCC Rules
Bluetooth and the Bluetooth logo are registered trade-
marks of Bluetooth SIG, Inc.
Memory Stick is a registered trademark of Sony Corpora-
tion and/or its affiliates
Wi-Fi is a trademark of the Wireless Ethernet Compati-
bility Alliance (WECA).
All other products are trademarks or registered trade-
marks of their respective companies.
Handling the cord on this product will expose
you to lead, a chemical known to the State of
California to cause birth defects or other
reproductive harm.
Copyright 2005 Fujitsu Computer Systems Corporation.
All rights reserved. No part of this publication may be
copied, reproduced, or translated, without the prior
written consent of Fujitsu Computer Systems
Corporation. No part of this publication may be stored
or transmitted in any electronic form without the prior
consent of Fujitsu Computer Systems Corporation.
B6FH-6891-01EN-00
according to FCC Part 15
C o p y r i g h t
Warning
Wash hands after handling.

Advertisement

loading

  Related Manuals for Fujitsu Stylistic 5030

  Summary of Contents for Fujitsu Stylistic 5030

  • Page 1: Declaration Of Conformity

    This product data does not constitute a warranty. Specifications are subject to change without knowledge. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; Stylistic is a registered trademark of Fujitsu Computer Systems Corporation.
  • Page 2 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C - U s e r ’ s G u i d e IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate.
  • Page 3: Table Of Contents

    About This Guide ......v Fujitsu Contact Information ....v Limited Warranty Information .
  • Page 4 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e APPENDIX A: WIRELESS LAN/ BLUETOOTH USER’S GUIDE Before Using the Wireless LAN...
  • Page 5 Preface...
  • Page 6 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – P r e f a c e...
  • Page 7: Preface

    Type of device connected, if any ■ Fujitsu Online You can go directly to the online Fujitsu product catalog for your Stylistic Tablet PC by clicking on the Fujitsu Weblinks -> LifeBook Accessories web site link, located in the Windows Start -> All Programs menu.
  • Page 8 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – P r e f a c e...
  • Page 9: Getting Started With Your Tablet Pc

    Getting Started with Your Tablet PC...
  • Page 10 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e...
  • Page 11: In-Box Items For The Stylistic St5000 Series Tablet Pc

    Getting Started with Your Stylistic Tablet PC ® The Stylistic ST5000 Series Tablet PC is a high- performance, pen-based computer that has been ® designed to support Microsoft Windows Edition 2005. This chapter provides an overview of the Stylistic ST5000 Series Tablet PC and its features. of illustration, the 12.1”...
  • Page 12: Optional Accessories

    The following optional accessories can be used with the Stylistic ST5000 Series Tablet PC. Refer to the instructions provided with these accessories for details on their use. For the latest list of accessories available for your Tablet PC, be sure to frequently check the Fujitsu Web site at: www.shopfujitsu.com.
  • Page 13: Stylistic Tablet Pc Features

    STYLISTIC TABLET PC FEATURES Features and controls that you use to operate the Stylistic ST5000 Series Tablet PC are outlined below and illustrated in Figures 1-1 through 1-6. Details on using these features and controls are provided later in this manual. Built-in Microphone (12.1”...
  • Page 14 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e Wireless LAN Module Cover Figure 1-3.
  • Page 15 Figure 1-4. Stylistic ST5000 Series Tablet PC Features (Top View) Top Features: • Pen: The main input device that you use to execute programs and enter data. A pen holder is built into the Tablet PC to store the pen when not in use. •...
  • Page 16 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e External Monitor Connector (behind cover) IEEE 1394 Jack Microphone Jack...
  • Page 17 Infrared Keyboard/Mouse Port Optional Wireless LAN location Figure 1-6. Stylistic ST5000 Series Tablet PC Features (Right Side View) Right-Side Features: • Pen: The main pointing device that you use to execute programs and enter data. A pen holder is built into the Tablet PC to store the pen when not in use.
  • Page 18: Status Display

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e STATUS DISPLAY Icons appear under each of the system status LEDs in the status display indicating the status of system functions...
  • Page 19 In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off. Icon Mode/State Battery • On State • Idle Mode •...
  • Page 20: Application Buttons

    When you press the Fn + EMail buttons at the same time, you automatically launch the Web browser. The default page to which you go is the Fujitsu home page. If you would like to change your home page, go to the Control Panel->...
  • Page 21 Refer to specific details above.* Pressing the Fn button twice in succession (within the “sticky” time*), causes the Fujitsu menu to appear on your screen, allowing you to modify certain system settings. G e t t i n g S t a r t e d...
  • Page 22: Navigation Buttons

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e NAVIGATION BUTTONS The two navigation buttons are located on the lower right-hand side of a vertically-oriented system.
  • Page 23: Tertiary Functions Of Buttons

    The system is booting up while the Fujitsu logo is displayed immediately after turning on the system. The table below indicates how the buttons act while the system is booting up and while you are in the BIOS.
  • Page 24: Security Functions Of Application Buttons

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e SECURITY FUNCTIONS OF APPLICATION BUTTONS Five buttons are used when implementing security functions.
  • Page 25: Using Your Security Panel

    The supervisor password can bypass the user password. 1. Go to the Start menu. 2. Click on Run. 3. Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\ FJSECS.EXE, then press [Enter] 4. Follow the on-screen instructions to set the Supervisor password.
  • Page 26 FJSECS.exe first to set the supervisor pass- word. Follow instructions under Setting Passwords on page 14. If you forget both passwords, please contact Fujitsu Computer Systems Corporation Service and Support at 1-800-8Fujitsu (1-800-838-5487). Fujitsu Computer Systems Corporation charges a service fee for unlocking a password-restricted Tablet PC.
  • Page 27: Connectors And Peripheral Interfaces

    CONNECTORS AND PERIPHERAL INTERFACES Connectors and peripheral interfaces on the Stylistic ST5000 Series Tablet PC allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5. Connector/ Tablet PC Peripheral Icon DC input connector USB Port PCMCIA Card slot...
  • Page 28 Swipe Sensor An infrared receiver built into the Tablet PC allows you to communicate with a Fujitsu wireless infrared keyboard or mouse. The keyboard infrared port works optimally when it is placed between 10 to 30 cm (approximately 4 in. to 12 in.) from the keyboard infrared port (which is located on the bottom edge of the Tablet PC).
  • Page 29: Using Your Tablet Pc

    Using Your Stylistic Tablet PC...
  • Page 30 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o...
  • Page 31: Using The St5000 Series Tablet Pc

    Using the Stylistic ST5000 Series Tablet PC This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic ST5000 Series Tablet PC. You should familiarize yourself with this information before you attempt to operate the system. Prior to using your system, be sure to fully charge the battery if you plan to run on battery power.
  • Page 32: Powering Up The Tablet Pc

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o Icon Appearance Current State On State...
  • Page 33 Contact your network administrator or help desk, or call Fujitsu Service and Support at 1-800-8Fujitsu (1-800-838- 5487) for details on your network log-off parameters.
  • Page 34: Resuming System Operation

    ■ tings. Select the Display tab, and move the Screen Brightness slider to change the brightness. Click the Fujitsu Menu icon in the system tray at the ■ bottom right of the screen. (When the cursor is on top of the icon, a message stating “Fujitsu Menu...” is dis- played.) Select Tablet and Pen Settings and select the...
  • Page 35: Calibrating The Pen

    Insert the flat end of the tip into the barrel and push it in firmly until it is seated. If you need more tips, they can be ordered from the Fujitsu Web site at: us.fujitsu.com/computers. CHARGING THE BATTERY The Stylistic ST5000 Series battery can be charged while it is installed in the Tablet PC.
  • Page 36: Removing And Installing The Battery

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o charge is below 90%, the battery begins charging and the Charging icon appears in the Status display.
  • Page 37: Modem Connection

    Operation of the Bridge Battery When installed in the Tablet PC, the battery provides power to some system components—even when the system is in the Off state. When the battery is removed, power is supplied to these components by a “bridge” battery that is built into the Tablet PC.
  • Page 38: Pc Card Slot

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o Removing A Memory Stick/SD Card To remove a Memory Stick/SD Card, follow these steps See your Memory Stick or SD Card manual...
  • Page 39 4. Reinstall the cover and screws that you removed in step 2. 5. Confirm that the DIMM module is recognized by the system. To do so, run BIOS Setup. The size of the DIMM module should be displayed in the Info menu in BIOS Setup.
  • Page 40 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o...
  • Page 41: Care And Maintenance

    Care and Maintenance...
  • Page 42 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T h r e e...
  • Page 43: Caring For Your Tablet Pc

    When installed, the screen protector becomes a durable, replaceable writing surface that protects the display screen from abrasion. To obtain additional screen protectors, use Fujitsu part number FPCSP08AP (6-pack) when ordering. Additional information about installation is included with the screen protectors.
  • Page 44: Storing The Tablet Pc

    If you are experiencing a problem with your Tablet PC that you cannot solve by taking the actions described, contact your local help desk or reseller, or call Fujitsu Service and Support at 1-800- 8Fujitsu (1-800-838-5487) for further assistance. System Will Not Resume Operation...
  • Page 45: Restoring The Pre-Installed Software

    If the system responds to a keyboard but not to a pen, contact your local help desk or reseller, or call Fujitsu Service and Support at 1-800-8Fujitsu (1-800-838-5487) for further assistance.
  • Page 46: Restoring The Factory Image

    1. Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility. 2. Using the arrow keys, go to the Boot menu.
  • Page 47: Automatically Downloading Driver Updates

    DRIVER UPDATES Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon...
  • Page 48 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T h r e e...
  • Page 49 Specifications...
  • Page 50 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n F o u r...
  • Page 51: System Specifications

    * The specifications for your particular model may vary. To determine the specifications for your system, please visit our Web site at: us.fujitsu.com/computers. S y s t e m S p e c i f i c a t i o n s Stylistic ST5000 Specifications (Continued) 10.4"...
  • Page 52: Power Specifications

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n F o u r Stylistic ST5000 Specifications (Continued) Wireless LAN Your system may have one of the two...
  • Page 53: Regulatory Information

    Regulatory Information NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 54 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom- munication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 55: Appendix A: Wireless Lan/ Bluetooth User's Guide

    Appendix A Wireless LAN/Bluetooth* User’s Guide * Optional devices...
  • Page 56 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A...
  • Page 57 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user's right to operate this equipment.
  • Page 58: Before Using The Wireless Lan

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A Before Using the Wireless LAN The Integrated Wireless LAN is a standard device on Stylistic ST5000 Tablet PC’s, and an option on Stylistic...
  • Page 59: For Better Communications

    Figure A-2. Access Point (Infrastructure) Mode Network ADSL modem, Internet cable modem, or similar Wireless LAN Access Point (Infrastructure) Mode (See Figure A-2) Infrastructure mode refers to a wireless network in which devices communicate with each other by first going through an Access Point (AP).
  • Page 60: Stopping Transmission

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A STOPPING TRANSMISSION To use this product inside hospitals, clinics, or airplanes, or in other places where the use of electronic equipment...
  • Page 61: Connecting The Wlan

    Connecting the WLAN FLOW OF OPERATIONS The wireless LAN connection procedure contained in this section is outlined below. Make sure the mobile computer is ready for the transmission of radio waves from the wireless LAN. For further details, see (See Starting Transmission on page 50 for more information.).
  • Page 62 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A For ad hoc connection: Assign the same network name to all the personal computers to be connected.
  • Page 63: Connection To The Network

    CONNECTION TO THE NETWORK This section explains connection to the network. If there is an administrator of the network, contact the network administrator for data settings. Setting the network Perform the “Setting TCP/IP” and “Confirming the computer and work group names” operations required for network connection.
  • Page 64 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A This operation is not required unless the sharing func- tion is to be used.
  • Page 65 Enter the sharing printer name in [Share name]. Click the [OK] button. Confirming connection After you have finished the network setup operations, access the folder whose sharing has been set for other personal computers. Also, confirm the status of the radio waves in case of trouble such as a network connection failure.
  • Page 66 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A IP Address ■...
  • Page 67: Other Settings

    Other settings SETTING OF POWER-SAVING FUNCTION You can set the power-saving function of wireless LAN. Default setting is auto-setting. In case of using the power- saving function, manually control the communication performance. Intel PROSet Wireless LAN: Click [Start] -> [(All) Programs] -> [Intel Network Adapters] ->...
  • Page 68: Troubleshooting

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A Troubleshooting Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table.
  • Page 69 Problem Possible Cause Unavailable It takes too long to retrieve the network network and display the connection connected (continued) computers. Incorrect setting of IP address Communication Access control may be disabled is disconnected soon after connection to the access point Authentication method may have been entered...
  • Page 70: Wireless Lan Glossary

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A Wireless LAN Glossary Access point A designation of wireless LAN network configurations.
  • Page 71 W i r e l e s s L A N U s e r ’ s G u i d e Open system authentication An 802.11 wireless LAN authentication method. Open System does not exchange any key or other information, it is a simple request by the mobile station to be authenti- cated without verifying identity.
  • Page 72: Ip Address Information

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A IP address information IP addressing is much more complicated than can be briefly explained in this...
  • Page 73: Specifications

    Specifications Item Type of network Transfer rate Active frequency Number of channels Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) * “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.
  • Page 74: Using The Bluetooth Device

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A Using the Bluetooth Device The Integrated Bluetooth module (UGXZ5-102A) is an optional device available for Fujitsu mobile computers. WHAT IS BLUETOOTH? Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras.
  • Page 75: Appendix B: Security Device User's Guide

    Appendix B Security Device* User’s Guide * Availability varies by model...
  • Page 76 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B...
  • Page 77: Fingerprint Sensor Device

    Fingerprint Sensor Device INTRODUCING THE FINGERPRINT SENSOR DEVICE Your system may have a fingerprint sensor device on the side of the display opposite the function buttons. The device is a standard feature on 12.1” models; it is not available on 10.4” models. (See Figure 1-2 on page 3 for location) Figure B-1 Fingerprint sensor With a fingerprint sensor, you can avoid having to enter...
  • Page 78: User Enrollment

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version...
  • Page 79: Using Omnipass

    OmniPass user. In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or when accessing corporate resources, the Domain: may not be your Windows computer name. Click [Next] to continue. 3. In this step OmniPass captures your fingerprint. Refer to “Enrolling a Fingerprint”...
  • Page 80 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B Using the following procedure, you can store a set of credentials into OmniPass.
  • Page 81: Configuring Omnipass

    OmniPass key in the system tray. Click Vault Manage- ment; you will be prompted to authenticate. Once you gain access to Vault Management, click Manage Pass- words under Vault Settings. You will see the Manage Passwords interface, with a list of friendly names. You can view the credentials stored for any remembered website by highlighting the desired resource under Pass- word Protected Dialog and clicking Unmask Values.
  • Page 82: Omnipass Control Center

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B proper credentials cannot be supplied, the user profile will not be imported ■...
  • Page 83 If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you to confirm user removal. Click OK to complete user removal Removing a user will automatically destroy all OmniPass data associated with that user.
  • Page 84: Troubleshooting

    S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B TROUBLESHOOTING You cannot use OmniPass to create Windows users.
  • Page 85: Trusted Platform Module Installation

    • If the system is not running, power it up. When the Fujitsu logo appears, press the [F2] but- ton. The BIOS Setup Utility will appear. S e c u r i t y D e v i c e U s e r ’ s G u i d e...
  • Page 86 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x B...
  • Page 87: Index

    Fujitsu Driver Update utility ....37 Fujitsu online ....... . .v hard disk drive access icon .
  • Page 88 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C infrared data transfer not working ....35 infrared keyboard port .
  • Page 89 Security Application Panel operating ....... . . 15 passwords ....... . . 14 uninstalling .
  • Page 90 S t y l i s t i c S T 5 0 0 0 S e r i e s T a b l e t P C...