Supply Socket Input - PROEL MQ10FX User Manual

35. 18V~ supply socket input
Here's where you plug in your mixer's external power supply. You should always connect your power supply
to the mixer before you plug the power supply into an electrical outlet.
36. POWER switch
Switch this one on and your mixer has power. Switch it off and it doesn't. Make sure that all master output
knobs are turned all the way down when powering your mixer up or down.
37. Power cable hook
Use this hook to prevent power cable drawing, simply go through it before connecting the cable into the
18V~ socket.
TECHNICAL SPECIFICATION
Mic Input 1-6
Line Input 1-6
Lo cut
EQ
Compressor 1-2
Line Input 7-10
MAIN MIX output
C. ROOM output
FX SEND output
HEADPHONES output
Effects
A/D and D/A converters
DSP resolution
Controls
Maximum level
Crosstalk
HUM & Noise
THD + Noise
Dimensions (WxHxD)
Weight
Supply
Mains Supply Voltage
Consumption
12
Type Data
sensitivity from -10 to -50 dB
impedance
2 Kohm
sensitivity
from +20 to -20 dB
impedance
10 Kohm
75Hz, 18dB/oct.
HIGH (shelving)
±15 dB @ 12KHz
MID (peaking)
±15 dB @ 2.5KHz
LOW (shelving)
±15 dB @ 80Hz
Fet
1 control knob
sensitivity
-10 dB
impedance 10 Kohm
nom. out level
+4 dBu
nom. out level
0 dBu
nom. out level
0 dBu
min. impedance
32 ohm
max. out level
(2x) 193 mW
100 presets
24 bit
24 bit
2-DIGIT display, DIAL, PEAK LED, MUTE
switch, MUTE footswitch
all outputs
+22 dBu
meas. at 1 KHz
> 82 dB
unweighted
< -93 dBu
at +4dB, 1kHz
< 0,008 %
275 x 275 x 76 mm
2,50 kg
18 VAC 1000 mA
use only supplied AC/AC ADAPTER
110-120 VAC (±10%) 50 / 60 Hz (US plug)
230-240 VAC (±10%) 50 / 60 Hz (EU plug)
240 VAC (±10%) 50 / 60 Hz (UK plug)
34 W
Connectors
Balanced XLR-F
Balanced JACK
Balanced JACK, RCA
Balanced JACK and XLR-M
Unbalanced JACK
Unbalanced JACK
Stereo JACK