CONNECTIONS (FIG.2) CONNESSIONI (FIG.2) p - hot p - hot ring - cold cold ground sleeve - ground LINE IN, various OUT LINE IN, OUT vari LINE IN, various OUT LINE IN, OUT vari Jack (balanced) Jack (bilanciato) Jack (unbalanced) Jack (sbilanciato) p - le *note: connect both cold and ground...
This warranty does not extend to damage resul ng from improper installa on, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty is s ll valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct damage"...
Thank you for having chosen a PROEL product. The new Mi Series has been created by PROEL in order to off er very compact mixers with a high input density at a very aff ordable price. The series includes 3 models with 6, 10 and 12 channels, featuring in a very compact package a high number of inputs and a full set of intelligent features, able to sa sfy most of the sound reinforcement applica ons.
Page 8
NOTE: the MAIN OUT is a true balanced output that can send the signal on a balanced line with or without a phantom power ac ve. So the Mi6 can also be used as a combina on mixer + DI box for sending the signals to a bigger main mixer console.
• I Prodo Proel sono des na esclusivamente ad un u lizzo specifi co di po sonoro: segnali di ingresso di po audio (20Hz-20kHz). Proel declina ogni responsabilità per danni a terzi causa da mancata manutenzione, manomissioni, uso improprio o installazione non eseguita secondo le norme di sicurezza.
Il mixer Mi6 offre in un formato ultra-compatto possibilità di missaggio avanzate con la qualità delle consolle professionali e con un design di s le non convenzionale.
Page 11
NOTA: la MAIN OUT è una uscita realmente bilanciata che può inviare il segnale su una linea bilanciata con o senza la phantom power a va. Pertanto Mi6 può essere u lizzato come una combinazione mixer + DI box per inviare il segnale a un mixer principale.
Need help?
Do you have a question about the Mi6 and is the answer not in the manual?
Questions and answers