Safety And Precautions; Packing; Shipments And Claims; Warranty And Returns - PROEL MIX842 User Manual

MIX842, MIX843, MIX844 – Manuale d'uso – User Manual

SAFETY AND PRECAUTIONS

When using any electric product, basic precautions should always be taken, including the following.
Read the instructions, before using the product and retain them for future reference.
- To reduce the risk, close supervision is necessary when the product is used near children.
- Protect the apparatus from atmospheric agents and keep it away from water and high humidity places.
- This product should be situated away from heat sources as radiators, lamps, etc.
- Care should be taken so that objects do not fall onto and liquids are not spilled inside the product.
Connect the apparatus to a power supply using only power cord included making always sure it is in good conditions:
- Make sure that power supply has a proper ground connection.
- Power supply cord should be unplugged from the outlet when left unused for a long period of time.
In case of fault or maintenance this product should be inspected only by qualified service personnel when:
- There is a flaw either in the connections or in the connecting cables.
- Liquids have spilled inside the product.
- The product has fallen and been damaged.
Any other servicing should be done by a qualified technician or by PROEL Service Department.
The MIX842, MIX843, MIX844 mixers are in compliance with Directive 89/336/EEC (Electromagnetic Compatibility) and successive
modifications 92/31/EEC and 93/68/EEC, as the EN 50082-1:1997, EN 55013:1990, EN 55020:1994 standards. It is also in compliance
with Directive 3/23/EEC (Low Voltage) and successive modifications 93/68/EEC, as the EN 60065:1998 standard.

PACKING

The packing of this product has undergone an integrity test according to ISTA 1A procedure. It is recommended to inspect the amplifier
after the unpacking. If any damage is found, notify immediately your dealer. Then save the complete packing for inspection. Proel
declines every responsibility for damage caused by transport.

SHIPMENTS AND CLAIMS

The goods are sold "ex works" and always travel at the risk and danger of the distributor. Eventual damage will have to be claimed to
the freight forwarder. Every claim for broken packs will have to be forwarded within 8 days from the reception of the goods.

WARRANTY AND RETURNS

MIX842, MIX843, MIX844 are provided with a warranty of operation and conformity to its own data sheets, as declared by the
manufacturer. The operation warranty is valid for 24 months after the purchase date. Defects detected within warranty period of validity
on sold products, due to defective materials or manufacturing faults, must be promptly reported to your dealer or distributor, enclosing
written evidence of the date of purchase and description of the type of defect detected. Warranty excludes defects caused by improper
use or tampering. Proel SpA will verify the validity of the claim through examination of the defect in relation to proper use and the actual
validity of the warranty. Proel SpA will eventually provide replacement or repair of the products declining, however, any obligation of
compensation for direct or indirect damage resulting from faultiness.

INSTALLATION

The product is designed for installation on a professional standard 19" rack.

LIMITATIONS OF USE

ASO25 is exclusively destined to specific audio applications: audio input signals (20Hz-20kHz).
Proel declines every responsibility for damages to third parties caused from lack of maintenance, manipulations, improper use or
installation without following safety regulations.
Design and specifications subject to change without notice.

POWER SUPPLY ADAPTER

The MIX842, MIX843, MIX844 are powered through the supplied power adapter 12V AC. Using the MIX with different power adapters or
with a DC voltage can damage the devices. It is possible also to use the Proel PPS62R power adapter that has 2 outputs to 12V AC.
11