BenQ EW Series User Manual page 21

6. Adjust the monitor height.
To adjust the monitor height, hold both the top and the
bottom of the monitor to lower the monitor or lift it
up to the desired height.
Your monitor is an edge-to-edge monitor and should be
handled with care. Avoid finger pressure on the screen
surface. Excessive force on the display is prohibited.
7. Tilt the monitor.
You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
8. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
24 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
How to assemble your monitor hardware 21