BenQ EW Series User Manual page 20

• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the
cable to the computer video socket.
• Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the monitor. Connect
the other end of the cable to the USB-C™ port of a laptop. It allows signal, audio, and data
transmission from the laptop to the monitor.
4. Connect the audio cable.
You may connect headphones to the headphone jack
found on the back side of the monitor.
5. Place the monitor properly.
Place the monitor as desired after the cables have been connected properly. Move the monitor carefully
by holding the lower part of monitor or the stand arm.
Finger pressure on the screen surface is prohibited. The screen may be damaged by excessive force.
20 How to assemble your monitor hardware