Sensaphone IMS-4010E User Manual page 3

Important Safety Instructions
Your IMS-4010E has been carefully designed to give you years of safe, reliable performance. As with all electrical
equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the
unit:
• Read the installation and operating instructions in this manual carefully. Be sure to save it for future refer-
ence.
• Read and follow all warning and instruction labels on the product itself.
• To protect the IMS-4010E from overheating, make sure all openings on the unit are not blocked. Do not place on
or near a heat source, such as a radiator or heat register.
• Do not use your IMS-4010E near water, or spill liquid of any kind into it.
• Be certain that your power source matches the rating in the specifications of this manual. If you're not sure of the
type of power supply to your facility, consult your dealer or local power company.
• Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by
persons walking on it.
• Do not overload wall outlets and extension cords, as this can result in the risk of fire or electric shock.
• Never push objects of any kind into this product through ventilation holes as they may touch dangerous voltage
points or short out parts that could result in a risk of fire or electric shock.
• To reduce the risk of electric shock, do not disassemble this product, but return it to Sensaphone Customer Ser-
vice, or another approved repair facility, when any service or repair work is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit
is subsequently used.
• If anything happens that indicates that your IMS-4010E is not working properly or has been damaged, unplug it
immediately and follow the procedures in the manual for having it serviced. Return the unit for servicing under
the following conditions:
1. The power cord or plug is frayed or damaged.
2. Liquid has been spilled into the product or it has been exposed to water.
3. The unit has been dropped, or the enclosure is damaged.
4. The unit doesn't function normally when you're following the operating instructions.
• To reduce the risk of fire or injury to persons, read and follow these instructions:
Use only the specified type and size batteries.
Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for possible special disposal
instructions.
Do not open or mutilate batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may
be toxic if swallowed.
Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, brace-
lets, and keys. The battery or conductor may overheat and cause burns.
Remove main power before replacing the batteries.
3