AES Cellcom Prime6 User Manual page 7

P a g e | 7
Permanent Codes (2G or 3G device)
Add a new code (up to 4 digits)
Enter 1 for the main output relay, or 2 for the
secondary output (ask your installer if this is
being used)
Can be 1 to 9999 seconds (2.7 hours).
For Automatic Gates
Enter 0 for a latching code (hold open).
Enter 1 sec to trigger normally.
Enter 3600 for a 1 hour hold open code.
Note: Latching and hold open only work for
selected types of gate installs (ask your
installer).
For Strike Locks enter 1 sec, mag locks 7
secs
Time Restricted Keypad Pin Codes
Up to 20 codes can be added which will only operate during
pre-set times and days of the week. This is useful to
improve security by giving pin codes which will only work
during desired hours and days of the week.
Add a new code (up to 4 digits)
Select the days during which the pin code
should work, and between which times. Note:
Enter time in 24 hr military format with no
colons.
E.g. 9am = 0900. 5pm = 1700.
Press Save to send SMS (iphone users must
also confirm from SMS screen).