Status Options - AES Cellcom Prime6 User Manual

Status Options

These buttons are useful to manage your intercom, visitors, access, and the current
status of the gates for example.
P a g e | 12
(Press Clock button, then Status)
Can be used to check if the intercom
reception is ok. You will receive a SMS reply
with a signal level on a scale of 1-31
Check stored phone numbers for dial out and
CallerID access.
Check stored keypad codes
Check stored proximity card users
Used to check if your gates are open or
closed, depending on your configuration. If in
doubt, ask your installer how this feature can
be used.
Used to check who opened or triggered your
gates and when. Get a SMS reply with pin
codes, prox cards, and caller ID access used
with time and date.
Signal Strength
This button will send the SMS *20# to the
intercom. It should reply as shown and will
indicate network type and for some versions will
show firmware version. Should it read below
level 10, talk to your installer about a high gain
antenna to boost reception or discuss trying an
alternative network provider.
O11 = first dial out number. O12 = second.
O21 = Button 2, first dial out number etc.
I=dial in CallerID numbers.
Stored Phone Numbers
This button will send an SMS string to the
intercom to check the phone numbers which
are stored in the unit.