H3C MSR Series Command Reference Manual page 35
Hide thumbs
Also See for MSR Series:
- Command reference manual (1187 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Table of Contents
Advertisement
Default
No physical interfaces are bound to an IRF port.
Views
IRF port view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies a physical interface by its type and number.
interface-name: Specifies a physical interface in the interface-typeinterface-number format. No
space is allowed between the interface-type and interface-number arguments.
Usage guidelines
Bind a minimum of one physical interface to an IRF port for setting up an IRF connection. You can
bind a maximum of two physical interfaces to an IRF port.
In IRF mode, use the shutdown command to shut down a physical interface before you bind it to or
remove it from an IRF port. To bring up the physical interface after a binding or binding removal
operation, use the undo shutdown command.
In standalone mode, the shutdown and undo shutdown operations are not required.
The system does not dynamically remove IRF port bindings when IRF links are lost, for example,
because an interface card is removed. To remove IRF port bindings, you must use the undo port
group interface command.
For more information about IRF port binding requirements, see Virtual Technologies Configuration
Guide.
Examples
# (Centralized devices in IRF mode.) Bind GigabitEthernet 2/0/1 to IRF-port 2/1 on IRF member 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] shutdown
[Sysname-GigabitEthernet2/0/1] quit
[Sysname] irf-port 2/1
[Sysname-irf-port2/1] port group interface gigabitethernet 2/0/1
[Sysname-irf-port2/1] quit
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] undo shutdown
# (Distributed devices in standalone mode.) Bind GigabitEthernet 2/0/1 to IRF-port 1.
<Sysname> system-view
[Sysname] irf-port 1
[Sysname-irf-port1] port group interface gigabitethernet 2/0/1
# (Distributed devices in IRF mode.) Bind GigabitEthernet 1/2/0/1 to IRF-port 1/1 on IRF member 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/2/0/1
[Sysname-GigabitEthernet1/2/0/1] shutdown
[Sysname-GigabitEthernet1/2/0/1] quit
[Sysname] irf-port 1/1
[Sysname-irf-port 1/1] port group interface gigabitethernet 1/2/0/1
[Sysname-irf-port 1/1] quit
29
Advertisement
Table of Contents
