H3C MSR Series Command Reference Manual page 12

Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# (Centralized devices in standalone mode.) Display the basic IRF settings of the device.
<Sysname> display irf configuration
MemberID Priority IRF-Port1
1 1
# (Centralized devices in IRF mode.) Display basic IRF settings for all members.
<Sysname> display irf configuration
MemberID NewID
1 1
2 2
# (Distributed devices in standalone mode.) Display the basic IRF settings of the device.
<Sysname> display irf configuration
MemberID Priority IRF-Port1
1 1
# (Distributed devices in IRF mode.) Display basic IRF settings for all members.
<Sysname> display irf configuration
MemberID
1
2
Table 3 Command output
Field
MemberID
Priority
NewID
IRF-Port1
IRF-Port2
Related commands
display irf
display irf topology
disable
IRF-Port1
GigabitEthernet1/0/1
disable
disable
NewID IRF-Port1
1 GigabitEthernet1/2/0/1
GigabitEthernet1/2/0/2
2 disable
Description
Current member ID of the device.
Member priority.
This field is available when the device is operating in standalone mode.
Member ID assigned to the device. This member ID takes effect at reboot.
This field is available when the device is operating in IRF mode.
Physical interfaces bound to IRF-port 1.
This field displays disable if no physical interfaces are bound to the IRF port.
Physical interfaces bound to IRF-port 2.
This field displays disable if no physical interfaces are bound to the IRF port.
IRF-Port2
disable
IRF-Port2
disable
GigabitEthernet2/0/1
IRF-Port2
disable
IRF-Port2
disable
GigabitEthernet2/2/0/1
GigabitEthernet2/2/0/2
6