Easy-Irf - H3C MSR Series Command Reference Manual

Table 6 Command output
Field
Multi-active recovery state
Excluded
ports(user-configured)
Excluded
ports(system-configured)
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled
interface
MAD status
Member ID
Port
MAD status
MAD BFD enabled
interface:
MAD status
Member ID
MAD IP address
Neighbor
MAD status

easy-irf

Use easy-irf to bulk-configure basic IRF settings for an IRF member device in IRF mode.
Syntax
easy-irf [ member member-id [ renumber new-member-id ] domain domain-id [ priority priority ]
[ irf-port1 interface-list1 ] [ irf-port2 interface-list2 ] ]
Description
Whether the IRF fabric is in Recovery state:
•
Yes—The IRF fabric is in Recovery state. When MAD detects that an IRF
fabric has split into multiple IRF fabrics, it allows one fabric to forward
traffic. All the other IRF fabrics are set to the Recovery state. In Recovery
state, MAD shuts down all network ports in the fabric except for the IRF
physical interfaces and ports configured to not shut down.
•
No—The IRF fabric is not in Recovery state. It is active and can forward
traffic.
Ports manually configured to not shut down when the IRF fabric transits to the
Recovery state.
Ports set to not shut down by default when the IRF fabric transits to the
Recovery state. These ports are not user configurable.
ARP MAD is not supported in the current software version.
ND MAD is not supported in the current software version.
Interface on which LACP MAD is enabled. This field is displayed for each
interface enabled with LACP MAD.
LACP MAD operating status:
•
Normal—LACP MAD is operating correctly.
•
Faulty—LACP MAD is not operating correctly. Verify the following items:
Verify that the ports on LACP MAD links are up.

Verify that the intermediate device supports extended LACPDUs.

Verify that all member devices have member ports used for LACP

MAD.
LACP MAD details:
•
Member ID—IRF member ID of a device.
•
Port—Member ports of the aggregate interface used for LACP MAD.
•
MAD status—LACP MAD operating state on a member port. Options
include Normal and Faulty.
Layer 3 interface on which BFD MAD is enabled.
BFD MAD operating status:
•
Normal—BFD MAD is operating correctly.
•
Faulty—BFD MAD is not operating correctly. Check the BFD MAD link
connectivity.
BFD MAD details:
•
Member ID—IRF member ID of the local device.
•
MAD IP address—MAD IP address of a member device.
•
Neighbor—IRF member ID of the neighboring member device.
•
MAD status—BFD MAD link state. Options include Normal and Faulty.
10