People Counting - HIKVISION DC-2CD20 Series User Manual

Notes:
 As shown in the figure above, red color block (255, 0, 0) indicates the most
welcome area, and blue color block (0, 0, 255) indicates the less-popular area.
 It is recommended that you do not adjust the electronic lens after the
installation is completed, which may cause the inaccuracy of the data in some
degree.

6.7.4 People Counting

This chapter introduces the people counting function of the iDS camera. It is used to
calculate the number of people entered or left a certain configured area.
 People Counting Configuration
Steps:
1. Enter the People Counting Configuration interface: Configuration >
Advanced Configuration > People Counting
User Manual of Network Camera
Figure 6-63 Space Heat Map
98