HIKVISION DC-2CD20 Series User Manual page 71

Configuration > Advanced Configuration> Events > Motion Detection
(2)Check the checkbox of Enable Motion Detection.
(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to
mark the detected objects with green rectangles.
Select Disable for rules if you don't want the detected objected
Note:
displayed with the rectangles. Select disable from Configuration-Local
Configuration-Live View Parameters-rules.
(4)Click Draw Area. Click and drag the mouse on the live video to draw a
motion detection area.
(5)Click Stop Drawing to finish drawing one area.
(6)(Optional) Click Clear All to clear all of the areas.
(7)(Optional) Move the slider to set the sensitivity of the detection.
2. Set the Arming Schedule for Motion Detection.
Steps:
User Manual of Network Camera
Figure 6-39 Enable Motion Detection
70