Display Info. On Stream; Configuring Image Parameters; Configuring Display Settings - HIKVISION DC-2CD20 Series User Manual

 The dynamic region refers to the ROI defined by intelligent analysis such as
human face detection. You can choose the Image Quality Enhancing level for
the ROI encoding.
5. Click Save to save the settings.

6.4.4 Display Info. on Stream

Check the checkbox to enable the function of Dual-VCA which can be used
cooperatively with NVR to implement dual-VCA retrieval during playback.

6.5 Configuring Image Parameters

6.5.1 Configuring Display Settings

Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
hue, sharpness, etc.
Note:
The display parameters vary according to the different camera model. Please refer to
the actual interface for details.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two
User Manual of Network Camera
Figure 6-28 Display Info. on Stream
59