HIKVISION DC-2CD20 Series User Manual page 74

detailed information.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note: To trigger an alarm output when an event occurs, please refer to Section
6.6.4 to set the related parameters.

Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
area of each area for different day/night switch.
Figure 6-43 Expert Mode of Motion Detection
 Day/Night Switch OFF
Steps:
(1) Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
(2) Select OFF for Switch Day and Night Settings.
(3) Select the area by clicking the area No.
(4) Slide the cursor to adjust the sensitivity and proportion of object on the area for the
selected area.
(5) Set the arming schedule and linkage method as in the normal configuration mode.
(6) Click Save to save the settings.
User Manual of Network Camera
73