Chapter 7 Storage Settings; Configuring Nas Settings - HIKVISION DC-2CD20 Series User Manual

Chapter 7 Storage Settings

Before you start:
To configure record settings, please make sure that you have the network storage
device within the network or the SD card inserted in your camera.

7.1 Configuring NAS Settings

Before you start:
The network disk should be available within the network and properly configured to
store the recorded files, log files, etc.
Steps:
1. Add the network disk
(1) Enter the NAS (Network-Attached Storage) Settings interface:
Configuration > Advanced Configuration > Storage > NAS
(2) Enter the IP address of the network disk, and enter the file path.
(3) Select the mounting type. NFS and SMB/CIFS are selectable. And you can set
the user name and password to guarantee the security if SMB/CIFS is
selected.
Note:
User Manual of Network Camera
Figure 7-1 Add Network Disk
102