Maintenance; Rebooting The Camera; Restoring Default Settings; Exporting / Importing Configuration File - HIKVISION DC-2CD20 Series User Manual

11.7 Maintenance

11.7.1 Rebooting the Camera

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click Reboot to reboot the network camera.

11.7.2 Restoring Default Settings

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Restore or Default to restore the default settings.
Note:
After restoring the default settings, the IP address is also restored to the
default IP address, please be careful for this action.

11.7.3 Exporting / Importing Configuration File

Purpose:
User Manual of Network Camera
Figure 11-12 Reboot the Device
Figure 11-13 Restore Default Settings
124