Manual Mode; Automatic Mode - CAME XTS 7IP WH WIFI User Manual

SIP settings - only on the slave indoor receiver
Mode
Manual
Flat ID
Username
Password
Display name
Server address
Server type
XIP server
19:02
Thursday
01 Feb 2018
D In this space enter the server's IP address.
Example of CAME server IP addresses:
ETI/MiniSER Xip, ETI/DOMO Xip - 192.168.0.3 (port 0) - 192.168.1.3 (port 1)
ETI/SER Xip, 192.168.1.1
Serverless IP entry panel, 192.168.1.5
E Select the type of server to which the device is connected.

Automatic mode

By choosing the automatic SIP setting and pressing the SAVE button, a guided procedure is launched which lets
you choose the server or master device, to which to connect your device. One you have entered the Flat ID call
code assigned to your indoor receiver through the PCS/Xip, during programming, the procedure is complete.
All manuals and user guides at all-guides.com
Automatic
A
B
C
D
E
Generic None
Save
Info Back

Manual Mode

A In this space enter the "SIP Us-
ername" assigned to the device by
PCS Xip.
B In this space type any password
assigned in the receiver's creden-
tials in the server's setup window.
C Name assigned to the device.
Home