Seats Reconfiguration - PREVOST X3-45 Commuter 2020 Operating Manual

5-52 Other Features

SEATS RECONFIGURATION

To accommodate a wheelchair, one row of seats
must be folded (9th row) and two rows must be
folded and slide away (7th & 8th row). Seats may
be folded on both sides of the coach to make
room for a second wheelchair.
FIGURE 15: SEATING ARRANGEMENT ROW 7-9
Electrical wheelchair or tri-wheeler may require
moving the sliding seats on both sides of the
coach to allow enough turnaround space.
To fold a set of seats, raise the seat back then lift
up the seat cushion by pulling the handle under
the cushion.
FIGURE 16: FOLDING SEATS
To slide a row of seats, remove the black covers
from the floor tracks.
1) Use the forward lock pedal to unlock seat from
the current position.
DOB 1300-1556
FIGURE 17: UNLOCK SEATS
2) Push either the forward or rear foot pedal to
slide the seats in desired direction. Slide seats
forward or back until engaged with a click sound.
FIGURE 18: SLIDING THE SEATS
3) Push on rear pedal to lock the seats in place.
PA-1639 Operator's Manual 2020 X3-45 Commuter