Select Test Screen; Done - Maico easyTymp Operating Manual

easyTymp® easyTymp® Operating Manual

4.4.2 Select Test Screen

Keypad operation from this screen
Top middle button brings you to the Setup screen. Top middle button brings you to the Setup screen.
Top right button selects the protocol of your choice and brings you to the Test screen. Top right button selects the protocol of your choice and brings you to the Test screen. Top right button selects the protocol of your choice and brings you to the Test screen.
Right and Left buttons will bring you to respectively the top or bottom of the protocol list. Right and Left buttons will bring you to respectively the top or bottom of the protocol list. Right and Left buttons will bring you to respectively the top or bottom of the protocol list.
Up and Down buttons make you move up or down one protocol. Down buttons make you move up or down one protocol.

4.4.3 Done

Operating from this screen:
Print: Top left button will result in printing the test results of the left and right ear. Note that Top left button will result in printing the test results of the left and right ear. Note that Top left button will result in printing the test results of the left and right ear. Note that
there should be a connection to the printer by placing the easyTymp® in the cradle. there should be a connection to the printer by placing
Save: Top middle button will bring you to the Top middle button will bring you to the Patient Screen from where patient
saved. After saving data easyTymp®
working memory and return ing
you save the data or retrieve you r saved recording from the session list and print afterwards you save the data or retrieve you
Operating Manual
Select Test: Opens screen with available test protocols Select Test:
Option: Extra software license for high frequency probe Option: Extra software license for high frequency probe Option: Extra software license for high frequency probe
tone of 1000 Hz tone of 1000 Hz
easyTymp® : Leads to the easyTymp® Setup
easyTymp®
Select: Select a test protocol and return to the test screen : Select a test protocol and return to the test screen
Select
from this screen :
easyTymp® will automatically go to the Done screen when easyTymp®
it has finished testing. it has finished testing.
From here, measurements of both ears can be reviewed, From here, measurements of both ears can be reviewed, From here, measurements of both ears can be reviewed,
printed and/or saved. Of course, you can also printed and/or saved. Of course, you can also directly start a printed and/or saved. Of course, you can also
new measurement in the Test screen from here. new measurement in the Test screen from here. new measurement in the Test screen from here.
easyTymp® prepares itself for a new measurement by clearing its prepares itself for a new measurement by clearing its
ing to the Test screen. You can either choose to print data before
saved recording from the session list and print afterwards .
screen with available test protocols .
will automatically go to the Done screen when
can either choose to print data before
17
in the cradle.
patient data can be