Advertisement
Step 5
You will need:
(P8)
30 x Plastic Slat Caps
(P10)
(P8)
(P9)
15 x Centre Plastic
Slat Caps
(P10)
(P9)
30 x Slats
(P8)
(P10)
Attach 2 x plastic caps (P8), 2 slats (P10) and 1 x centre plastic slat cap (P9) together as shown.
Repeat for the other slats (P10).
Step 6
Lower the slat (P10) with the plastic slat caps (P8) and centre plastic slat caps (P9) onto the 2 x
side rails (P3) and centre rail (P6). Ensure the plastic slat caps (P8, P9) are in place over the side
rail (P3) holes and centre rail holes (P6) and apply dowward pressure until the plastic slat caps
are fully inserted into the rails. Repeat for every bed slat until finished.
Lower the slat (P10) with the end connectors (P8) to the side rails (P3). Ensure the plastic
slat caps are in place over the side rail holes and apply downward pressure until the
plastic slat caps are fully inserted into the rails. Repeat for every bed slat until finished.
fantasticfurniture.com.au
Page 7
Advertisement
