Bed Head (P1) Allen Key provided 2 x Side Rails (P3) Bed Foot (P2) 13 x Fantastic Furniture ComfortSlats Single (P5) 26 x Plastic Connectors (P4) 8 x Bolts (H1) Please make sure you have all these parts before you start.
Page 3
Step 1 You will need 2 x Bolts (H1) 1 x Allen key Attach one Side Rail (P3) to the Bed Head (P1) with Bolts (H1). Do not fully tighten Bolts You will need Step 2 2 x Bolts (H1) 1 x Allen key Page 3 Attach one Side Rail (P3) to the Bed Foot (P2) with Bolts (H1).
Leave bolts loose Step 4 (P5) (P4) (P4) YOU WILL NEED 26 X Plastic Connectors Push 26 x Plastic Connectors (P4) firmly (P4) onto 13 x Fantastic Furniture ComfortSlats Single (P5) 13 x Fantastic Furniture ComfortSlats Single Page 4 (P5)
Page 5
Step 5a Step 5b Place the slat in position then push down on the Repeat the same process for the centre of the slat to flatten out the slat. Make other end of the slat sure the plastic prong lines up with the hole. Then push firmly Step 6 Page 5...
Page 6
Step 7 1 x Allen Key IMPORTANT : Fully tighten all bolts on bed The job is now complete! In the interest of our environment Please dispose of all packaging thoughtfully. Page 6...