Advertisement
Step 3
You will need
4 x Short Bolts
(H1)
M6x20
1 x Allen Key
(H3)
1 x Larger Medium
Bolt
(H8)
M6x45
1 x Hex Nuts
(H4)
1 x Spanner
( H5 )
Secure the centre rail (P6) to the 2 x cross bars (P4) with 4 x short bolts (H1), tighten with the
allen key (H3).
Secure the centre rail (P6) to the cross bar (P7) with 1 x Larger Medium Bolts (H8) and 1 x hex
nut (H4), tighten with the allen key (H3) and spanner (H5) as shown.
Step 4
You will need
12 x Metal
Washer
( H7 )
1 x Small
Allen Key
( H3 )
6 x Medium Bolts
(H6)
M6x40
6 x Hex Nuts
(H4)
1 x Spanner
( H5 )
Attach the 3 x support legs (P5) to the centre rail (P6) with 6 x medium bolts (H6)
12 x metal washers and 6 x hex nuts (H4).
Tighten with the allen key (H3) and spanner (H5) as shown.
Extend the adjusters on the 3 x support legs (P5) by turning clockwise so that they
are level on the ground.
Important Note: The adjusters must be retracted by turning anticlockwise before
moving the bed.The adjusters should be extended again after moving the bed.
fantasticfurniture.com.au
(P6)
(P4)
H4
H1
H1
(P6)
H3
(P4)
H4
H7
(P6)
H7
H6
H3
(P5)
H3
H8
(P7)
H5
(P6)
(P4)
(P7)
H5
(P6)
(P5)
(P5)
(P5)
Page 6
Advertisement
