Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Eden Utility 6 Drawer MK2
Summary of Contents for fantastic furniture Eden Utility 6 Drawer MK2
- Page 1 Version 1.0 Eden Utility 6 Drawer MK2 fantasticfurniture.com.au...
- Page 2 Secure it! Reduce the risk of furniture tip-over accidents Please seek professional advice if you are in doubt of what fixing device to use. Recommended Weight Capacity : 15kg/drawer • • • Do not • • Wall attachment guide (with available wood stud) (with available wood stud) crew...
- Page 3 We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 3 fantasticfurniture.com.au...
-
Page 4: Assembly Checklist
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly. -
Page 5: What You Need
Top Panel What you need (P1) to assemble the product Back Panel (P5) Rail Rail Right Side (P6) (P7) Panel (P4) DO NOT USE Back Rail Panel Other tools you need: (P7) (P5) Phillips head screwdriver; Rail Hammer (P6) Left Side Panel (P3) Back Panel... - Page 6 Step 1 You will need 18 x Small 6 x CL Runner Screws (H5) Tracks (H6) Phillips Head Screwdriver (P3) Attach 6 x CL Runner Tracks (H6) to Left Side Panel (P3) with 18 x Small Screws (H5) by tightening with the Phillips Head Screwdriver. Step 2 You will need 10 x Cam Bolts...
- Page 7 Step 3 You will need 18 x Small 6 x CR Runner Screws (H5) Tracks (H7) Phillips Head Screwdriver (P4) Attach 6 x CR Runner Tracks (H7) to Right Side Panel (P4) with 18 x Small Screws (H5) by tightening with the Phillips Head Screwdriver. Step 4 You will need 10 x Cam Bolts...
- Page 8 Step 5 You will need 10 x Dowels (H1) (P3) Insert 10 x Dowels (H1) into Left Side Panel (P3) as shown. Step 6 (P6) You will need (P1) (P6) (P7) 10 x Cam Nuts Phillips Head (H4) Screwdriver (P7) (P8) (P2) (P8)
- Page 9 Ensure laminated Step 7 side of panels are facing inwards. (P5) (P1) (P5) (P6) (P5) (P6) (P2) (P3) Slide Back Panels (P5 x 3) into the grooves of Top Panel (P1), Base Panel (P2), Rails (P6 x 2) and Left Side Panel (P3). Step 8 You will need (P6)
- Page 10 Step 9 You will need (P4) 10 x Cam Nuts Phillips Head (H4) Screwdriver (P6) (P1) (P6) (P7) (P7) (P8) (P2) (P8) Insert 10 x Cam Nuts (H4) into Top Panel (P1), Base Panel (P2) and Rails (P6 x 2, P7 x 2, P8 x 2). Rotate the nuts so the arrows point towards the incoming bolts.
- Page 11 Step 11 You will need 30 x Cam Phillips Head Bolts (H3) Screwdriver (P9) Attach 5 x Cam Bolts (H3) to Drawer Front (P9) as shown by tightening with the Phillips Head Screwdriver. Repeat this step for the remaining five Drawer Fronts (P9 x 5). Step 12 You will need (P11)
- Page 12 Step 13 Ensure laminated side of panel is facing inwards. (P12) (P11) (P10) (P13) Slide Drawer Base (P12) into the grooves of Left & Right Drawer Sides (P10 & P11) and Drawer Back (P13). Repeat this step for the remaining Drawer Bases (P12 x 5). Step 14 You will need (P9)
- Page 13 Step 15 (P11) You will need 6 x DL Runners 24 x Small (H8) Screws (H5) (P10) 6 x DR Runners Phillips Head (H9) Screwdriver Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P10) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P11) with 4 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
-
Page 14: Job Complete
Step 17 (P1) You will need (P5) 8 x Wedges 8 x Wedge (H11) Screws (H12) We strongly advise that you use the wall safety strap provided to prevent the unit toppling. 1 x Safety 1 x Safety Strap Strap (H13) Screw (H14) (P5) 1 x Washer...