Table of Contents
Advertisement
Before first use
Basic settings
You must make the following settings
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, only use the oven
when it has been fully installed.
The oven will turn on automatically
when it is connected to the electrical
supply.
Setting the language
Select the desired language.
If you have accidentally selected a
language that you don't understand,
proceed as described in "Settings –
Language ".
Setting the location
Select the required location.
Setting up Miele@home
Set up "Miele@home"
display.
To set up Miele@home now, confirm
by touching OK.
To set it up at a later date, select
and confirm with OK.
See "Settings – Miele@home" for
information on setting up at a later
date.
34
will appear on the
Skip
To set up Miele@home immediately,
select the connection method you
want to use.
You will then be guided by the display
and the Miele app.
Setting the time
Set the time of day in hours and
minutes.
Confirm with OK.
Setting the voltage
The set voltage variant must
match the voltage of the domestic
electrical supply in order to avoid the
risk of damage to the oven.
Confirm the voltage before setting. If
in any doubt, consult a qualified
electrician.
Select the voltage variant.
Confirm with OK.
Completing the commissioning
process
Follow any further instructions on the
display.
The appliance is now ready for use.
Advertisement
Table of Contents
