Table of Contents
Advertisement
Installing and removing the
oven
For safety reasons, only use the oven
when it has been fully installed.
Do not open the door when the oven
is on the floor. This could damage
the door.
Do not open the door until the oven
has been installed inside the housing
unit.
Securing the oven in the housing unit
Connect the oven to the power
supply.
Do not carry the oven by the door
handle. This could damage the door.
Use the carry handles on the side of
the housing to lift the appliance.
Push the oven into the housing unit
far enough for you to be able to
remove the carry handles.
Remove the carry handles (1.).
Keep the carry handles in case the
oven needs to be moved again in the
future.
Push the oven all the way into the
housing unit and align it in the center
of the unit (2.).
Open the door.
Insert the mounting aid into the hole
in the front frame.
Insert the bolt into the mounting aid
and tighten it in the cabinet niche.
Installation
97
Advertisement
Table of Contents
