Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
While the appliance is under warranty, repairs should only be
undertaken by a service technician authorized by Miele Customer
Service. Otherwise the warranty will be invalidated.
Miele can only guarantee the safety of the appliance when original
Miele parts are used. Faulty components must only be replaced with
genuine Miele parts.
If the oven is delivered without a power cord, a special cord must
be installed by a Miele authorized technician (see "Installation –
Electrical connection").
If the power cord is damaged, it must be replaced with a special
power cord by a Miele authorized technician (see "Installation –
Electrical connection").
During installation, maintenance, and repair work, the oven must
be completely disconnected from the power supply. To ensure this:
- The circuit breakers have been switched off, or
- the fuses of the electrical installation have been completely
removed, or
- the plug (if present) is removed from the outlet. To do this, pull the
plug not the cord.
The oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g., by installing heat insulation strips in the cabinet niche).
In addition, the required supply of cool air must not be excessively
heated by other heat sources.
If the oven is built in behind a cabinet door front, do not close the
cabinet door while the oven is in use. Heat and moisture can build
up behind the cabinet door when closed. This can result in damage
to the oven, cabinet niche, and floor. Leave the cabinet door front
open until the oven has cooled down completely.
10
Advertisement
Table of Contents
