13. Auto‐close function
This feature can be selected to make the gate stay open for some time before it
automatically closes, The auto‐close time can be adjusted to 12, 25, or 50 seconds.
DIP4 (Auto close1)
OFF
OFF
ON
ON
Cancel auto‐close function
Move the fourth and fifth DIP switches to the off position in order to disable the
auto close feature.
14. Additional Features
AUTO CLOSE1: The function of auto close or
without auto close can be selected
AUTO CLOSE2: The function of auto close or
without auto close can be selected
DIP5 (Auto close2)
OFF
Without auto close function
ON
Auto close On, waiting time 50 seconds
OFF
Auto close On, waiting time 25 seconds
ON
Auto close On, waiting time 12 seconds
LIGHT DELAY: Flashing light delay on or off.
ON: The flashing light starts 5 seconds ahead of
gate moving.
OFF: The flashing light starts and gate starts
moving at same time.
OPENING PHOTO: When the gate is moving at
opening phase, the photo sensor can be selected
as active or inactive.
ON: If photo sensor covered by the obstacle
during the gate opening Phase, the gate system
will stop immediately. OFF:
If photo sensor covered by the obstacle during
the gate opening phase, the gate system will not
be affected by photo sensor.
26
Function