6b. Pull to Open Inward
Mount the actuators on the included brackets according to the figure below.
The gate is mounted on one face of the mounting post, and the opener is
mounted on the face 90 degrees from it. The actuator mechanism should
always be inside the property so that it cannot be tampered with from the
outside. Initially mount the actuators on the gate so that the gate is open.
Opening
A cm
Angle
90
17.5
110
18
The installation should meet the specifications shown in the figure. Failure to do so may
cause opening and closing problems.
Figure 4.
A inch B cm
B inch
6.88
14.5
5.7
7.08
9.5
3.74
12
C cm
C inch
D cm
117.8
46.38
6.5
118.3
46.57
6.5
D inch
2.56
2.56