7. Stopper and Latch Installation
WITHOUT Electrical Latch
1. Install Stopper 1: stops gate in closed position.
2. Install Stoppers 2: stops gate in maximum opened position.
With Electrical Latch (OPTIONAL)
3. Install the Electrical Latch and the Slave Gate Stop on the gate as shown in the
diagram.
4. Install the L Bar on the opposite gate
5. Install Stopper 1: stops gate in closed position.
6. Install Stoppers 2: stops gate in maximum opened position.
See "YG‐Series Lock Installation Cross Section" on the next page
to understand how the Electrical Latch functions.
Figure 6a.
Figure 6b.
14