Table of Contents
Advertisement
Stopper and Latch Installation
The stoppers act as limits for the gate movement. Installing the stoppers allows you to
control exactly where your gate stops.
The electric latch is added to hold the gate more securely than relying on the actuators to
hold the gate closed. Install the latch securely into the ground.
Stoppers without Electric Latch
Install Stopper 1: stops gate in closed position.
Install Stoppers 2: stops gate in maximum opened position.
Stoppers with Electric Latch
Install the Electrical Latch and the Slave Gate Stop on the gate as shown above.
Install the L Bar on the opposite gate
Install Stopper 1: stops gate in closed position.
Install Stoppers 2: stops gate in maximum opened position.
You may notice the gate pushing in the opposite direction of motion. This is
the Kickback/extra push feature. It helps the gate disengage the lock.
page 18
Advertisement
Table of Contents
