Operator Cab; Ignition Switch; Accessory Outlet; Accelerator Pedal - Xtreme xr1255 Operation And Safety Manual

Operator Cab

A brief description of controls, indicators, and
instruments is provided as a convenience for
the operator. These descriptions DO NOT pro-
vide complete operation instructions. Read
and understand the entire manual to prevent
death, serious injury, or equipment damage.

Ignition Switch

A key is required to operate the ignition switch.
Figure 11. Key and Ignition Switch
The ignition switch has three (3) positions: OFF, RUN, and
START. To start the engine, turn the key to the RUN position,
wait until the Glow Plugs Wait to Start Indicator (LED) goes off
and then turn the key to the START position to crank the en-
gine. After the engine starts, release the key.
Ignition Switch
Position
OFF Shuts down entire electrical system, except
the horn and accessory outlet.
RUN All controls and indicators are operable.
START Engages starter motor to crank engine.
NOTE: The START position is spring-loaded. When the key is
released, the Ignition switch will automatically return to the
RUN position.
Operation Manual
Warning
Purpose

Accessory Outlet

A 12 Volt accessory outlet is provided as a power source for
personal items, such as a radio or cell phone.
Figure 12. Accessory Outlet

Accelerator Pedal

Press the accelerator pedal to increase engine speed. The ac-
celerator pedal is spring-loaded to return to idle speed.
Figure 13. Accelerator Pedal
32
Operator Cab